Products – Kolinker Precision Technology Ltd.

Return to previous page

New_KH2281

KH2281 – Ion Etching System

Model: KH2281

48-channel simultaneous frequency fine-tuning of crystals using ion etching method.
The main vacuum chamber maintains at high vacuum state, reducing gas contamination and accelerating the production process.
An auxiliary pre-vacuum chamber is equipped for tray exchange.
An optional fully automatic post-process sorting device is available to classify products as qualified/unqualified and filter out defective ones.

PDF Spec. Sheet:

New_KNet200M

KNet200M – Network Analyzer

Model: KNet200M

Complete solution for crystal measurement
High speed serial communication USB interface
Easy programming, no library needed

PDF Spec. Sheet:

New_FC500M

FC500M – Frequency Counter

Model: FC500M

Highly Cost Effective
Zero-Dead-Time: Gap-free, uninterrupted measurement
High Resolution: 11 digits frequency measurement precision
Broad Input Bandwidth: Equipped with 4 channels, 500MHz input bandwidth
Remote-Control Solution: USB interface
High Throughput Rate: up to 4K samples per second frequency measurement.
Easy calibration: Support hardware trimming & software calibration

PDF Spec. Sheet:

New_KH2200TC

KH2200TC – Ion Etching System (Independent Temperature Control)

Model: KH2200TC

Crystals frequency are adjusted by Ion Beam Etching.
48 Position pallet in which 8 pieces of crystals are etched simultaneously*, temperature range set between room temp. to 120 O C +/ 0.2 O C.
All crystals are under temperature control independently, to achieve good temperature uniformity and accuracy.
*Depends on pallet type, no. of unit may be varied.

PDF Spec. Sheet:

KH2201

KH2201 – Ion etching System (Oscillator upgrade)

Model: KH2201

Oscillator etching upgrade kit for standard KH2200 system
Anode Layer Magnetron Ion Source, filament type neutralization
Up to 32 (1) pieces of oscillators are etched simultaneously for high efficiency and throughput. ( depends on pallet size)

PDF Spec. Sheet:

KH2200 – Ion Etching system

Model: KH2200

2011 Hong Kong Award for Industries: Machinery and Machine tools design grand award.
Crystal frequencies are adjusted by ion beam etching.
Up to 32 pieces of crystal are etched simultaneously for high efficiency and throughput.

PDF Spec. Sheet:

KH3440 – High Speed Final Sorter for SMD Crystal

Model: KH3440

Multi-Head Final Sorter to increase the sorting speed.
Support small size SMD package from 3225 to 1210 .
Option: Laser Marking, Tape & Reel taping

KH5665 – Automatic Multi-Head HIGH DRIVER SYSTEM (Pallet Type)

Model: KH5665

Support pallet type final frequency adjustment system, such as Kolinker KH2200 system
To perform high driving process to the crystals

PDF Spec. Sheet:

KStar 100 – All-in-one ultra-stable OCXO based frequency and time standard

Model: KStar 100

Synchronize to built-in multi-system GNSS receiver.
Frequency accuracy ≤ ±1E-12 at GNSS locked.
Holdover stability ≤ ±1.5us over 24 hours in 20˚C temperature variation.
Dimension 158 x 190 x 53 mm.

PDF Spec. Sheet:

8801200-38-000 KNet200M/KH1800/KH1820 Univ. SMD Test HD Adaptor Kit

Model: KH1800

KH1200/KH1240/KH1800/KH1820 Standard Clamp base

8805303-02-005 KH5303/6800 3225 CONTACT BD

Model: KH5303/6800

KH5303/6800 contact board / size: 3225

8805303-02-004 KH5303/6800 4025 CONTACT BD

Model: KH5303/6800

KH5303/6800 contact board / size: 4025

More