The KH6801 utilizes the latest
Proportional- Integral- Differential (PID) plating control
 algorithm
enhanced with shutter forecasting control. Intelligent solid-state
plating power control module gives better plating accuracy
and higher speed compared to the other conventional shutter-only
or PID-only control system. Typical plat ing time per crystal
is less than 3.0 seconds (totally 2 plating cycles), with
typical frequency spread of less than ± 1 ppm *
Note.
The built-in high speed KM5112 Frequency Counter Card provides
the final accuracy of the clock osc. being plated. Measurement
accuracy of less than ± 1 ppm could be achieved. Post
measurement can be used.
The system operation software is user friendly and menu
driven. Touch panel is designed for production workers to
operate easily, so that they do not need to work with the
computer.
- Frequency range : 10KHz to 700MHz
- P roportional- Integral- Differential (PID) plating control
algorithm enhanced with shutter forecasting control.
- Programmable pitch for different size of pallets (max.
size 1 75 x 130mm).
- Typical plate time per crystal is less than 3.0 seconds
(totally 2 plating cycles), with typical frequency spread
± 1 ppm * Note.
- The system operation software is user friendly and menu
driven.
- Touch panel is designed for production workers to operate
easily.
- Filament control : Computer controlled real time high
speed solid-state SSR.
- Dual pallets for high throughput.
- Simultaneous plating (Optional) increase throughput.
- High speed Turbo pump. (Optional : Cryo Pump, Diffusion
Pump)
- UPS (Un-interrupt Power Supply) to protect the system
from power failure.
- Optional for SMD crystal
|
